Cannot Open Volume for Direct Access

Title: Best Fixes for CHKDSK Cannot Open Volume for Direct Access
Keywords: cannot open volume for direct access, CHKDSK cannot open volume for direct access, CHKDSK cannot open volume for direct access Windows 10, CHKDSK cannot open volume for direct access USB, CHKDSK cannot open volume for direct access external drive
Description: When facing CHKDSK cannot open volume for direct access error, users can try these three solutions mentioned in this post to get rid of the issue.

http://www.coknews.com

CHKDSK Cannot Open Volume for Direct Access

When the digital data storage devices, like computer hard drives, USB flash drives, and SD card get corrupted, you can use CHKDSK to check and fix the issue. However, some users report that they encounter CHKDSK cannot open volume for direct access when doing the job.

In this situation, how to get rid of cannot open volume for direct access error? In summary, there are three possible ways which can solve this issue, and you can try them one by one.

The following solutions are based on CHKDSK cannot open volume for direct access Windows 10. If you are using other Windows operating systems, the operations are similar.

Additionally, if you want to solve CHKDSK cannot open volume for direct access USB or CHKDSK cannot open volume for direct access external drive issue, these solutions are also available.

Solution 1: Disable Any Third-party Services Which May Lock the Hard Drive Partition

A third-party application like a virus checker or a disk monitor tool can lock the hard drive partition you want to check. Thus, you can try to disable the third-party service to have a try:

Step 1: Press Win + R at the same time to open the Run box. Type services.msc into the box and click OK.
Step 2: Find the respective third-party service in the Services (Local) list. Next, right-click the specific service and select Properties.
Step 3: Switch the Startup type to Disabled and click OK.

After these three steps, you can exit from the Services, restart the computer and try to run CHKDSK again to check if the error message cannot open volume for direct access disappears.

Solution 2: Uninstall Any Third-party Software

Sometimes, a third-party software can lock the partition users want to check. So, you can uninstall the third-party software to see whether it can solve the issue.

To do this job, you can right-click on the Start button and then go to Control Panel > Programs and Features. After that, you can right-click on the target program and choose Uninstall.

Finally, you can go to check whether cannot open volume for direct access error disappears.

Solution 3: Recover Data on the Partition and Format It to Normal State

If the above two solutions can’t get rid of cannot open volume for direct access error, you should consider formatting the target partition to its normal state.

However, there must be some important files on the partition in most cases. In this situation, you can first use a piece of free data recovery software to retrieve the data on the partition and then format it.

MiniTool Power Data Recovery is an ideal tool which can be used to recover existing and deleted data from different kinds of data storage devices like hard drives, USB flash drives, SD cards, and more in various situations. Thus, it can assist you to get the vital data back from the issued drive.

Move 1: Recover Data from the Target Partition

To recover files from the drive which is facing cannot open volume for direct access in Windows 10, you can use This PC module of this MiniTool data recovery software.

You can download the Trial Edition of this software to see whether it can find the files on the specific partition. After installing the software, you can follow these steps to recover data:

 

Step 1: Open the software to enter This PC interface directly. Then, you can choose the target drive and click on the Scan button to continue.

http://www.coknews.com/

Step 2: The software will start the scanning process which will take some minutes. Thus, you should be patient.

When the scanning ends, you can see the scan result interface as follows.

http://www.coknews.com/

By default, the scanned files are listed by path. You can unfold each path to find the files they want to recover.

In addition, you can also use the Type, Find, Filter and Preview features to find the needed files easily and quickly.

Step 3: If this software can find the wanted files, you can update this Trial Edition to an advanced one to save files without limitation.

Move 2: Format the Target Partition

After recovering the files, you can feel free to format the target drive to make it back to the normal state.

To do this work, you can go to This PC in File Explorer, right-click on the drive to choose Format from the popup list, and then format the drive.

Besides, you can also use this partition magic – MiniTool Partition Wizard and its Format Partition to do this job. For personal users, the Free Edition can fully meet the need.

These are the three solutions to fixing cannot open volume for direct access error, and they are easy to use. Hope they can help you to solve the issue.

Please follow and like us:

Leave a Reply

Your email address will not be published. Required fields are marked *